Legals for May, 23 2023
BEFORE THE HONORABLE BOARD OF COUNTY COMMISSIONERS OF GRANT COUNTY, WASHINGTON In the matter of the Application of NOTICE OF HEARING ON APPLICATION FOR A COUNTY Public Utility District No. 2 of ROAD FRANCHISE Grant County, WA for a franchise to enter upon, construct, operate and maintain certain facilities upon County Roads within the County of Grant, State of Washington NOTICE IS HEREBY GIVEN that the Public Utility District No. 2 of Grant County has filed with the Board of County Commissioners of Grant County, Washington, an application for a franchise for a period of fifty (50) years set, erect, install, place, lay, construct, operate and maintain and install overhead and/or underground electrical distribution line(s) and construct, reconstruct, operate, patrol, maintain and remove communication, fiber optic, telecommunication, telephonic, television, telecomputing or any other communication or cable facilities along certain County roads in Grant County, Washington lying within the following described portion of the County, to-wit: All Sections, Townships, Ranges, County Roads, Right of Ways and undeveloped Right of Ways in the jurisdiction of Grant County, WA NOTICE IS FURTHER GIVEN that the Board of County Commissioners of Grant County, Washington, has fixed the hearing on said application for the franchise for the 30th day of May, 2023 at the hour of 3:15 o’clock pm in the Board of County Commissioners’ room in the Grant County Courthouse in Ephrata, Grant County, State of Washington, and any person may appear at this time and place to be heard for or against the granting or denying of said franchise or any part thereof. Webex virtual meeting is also available by calling 1-408-418-9388 and entering access code 2486 727 7823 (password 26220629). DATED this 21st day of April, 2023. Michele Jaderlund, Auditor of Grant County, Washington s/sMichele Jaderlund____________ Auditor #05012/8113 Pub: May 16, 23, 2023
NOTICE IS HEREBY GIVEN THAT AN OPEN RECORD PUBLIC HEARING WILL BE HELD May 30, 2023 at 3:30 p.m. in the Grant County Commissioners Hearing Room, Courthouse, Ephrata, WA to consider the following budget extension request: *Grants Administration Fund 190.001 to receive Washington State Department of Commerce Grants in the amount of $4,611,876.00 for pass through funding for the ERAP 2.0 (Contract 21-4619C-108 $3,905,000) and CHG (Contract 22-46108-10 $706,876.00) grants. Any interested persons may appear regarding these matters. Grant County is also providing access to this scheduled hearing via WebEx audio. To participate in the hearing please call in to the hearing at 1 (408) 418-9388 and enter the access code (2486 727 7823) followed by password (26220629), you will be joined to the meeting in a ‘muted’ status until such time as the hearing allows for public testimony. If you have any questions about this procedure, please call the Commissioner’s Office in advance of the hearing. Brittany Lutz Deputy Clerk of the Board Grant County Commissioners #05011/8114 Pub: May 16, 23, 2023
NOTICE TO SUPPLIERS Sealed bids plainly marked “Bid for Steel Canopy Body” will be received by Grant County at the Grant County Public Works Office located in Ephrata, WA. 124 Enterprise Street, Ephrata, WA 98823, until 9:00 A.M., Tuesday, May 30th, 2023 and will then and there in the Public Meeting Room be opened and publicly read. This contract provides for furnishing and delivering a Steel Canopy Body in accordance with the plans and specifications. Plans, specifications and bid documents may be obtained from the Public Works Department at no charge. Informational copies of the maps, plans, and specifications are on file for inspection at the Public Works Department of Grant County, 124 Enterprise St. SE, Ephrata, WA 98823. The Board of County Commissioners of Grant County, Washington, reserves the right to reject any and all bids. The award of this proposal, if made, may be made in whole or in part as determined to be in the best interest of Grant County. The improvement for which bids will be received are as follows: Bid Specifications for Steel Canopy Body General Specifications This spec is patterned after the Knapheide KC7132H2094 Steel Canopy Body. - 133.25” L x 94”W x 90” H (40” H side compartments) - 20” side compartment depth - Curbside Horizontal (RH) compartment extends to rear of body - 14 and 16 gauge galvanneal steel body shell – Keyed alike stainless steel paddle handles with rotary style latches - Master locking system installed on both sides of body - Transverse-style L V 1 compartment extends to the back of R V 1 - (2) adjustable divider shelves in R V 1 compartment - (2) adjustable divider shelves in each L V 2 and R V 2 compartment - (1) bolt t- in divider shelf in R H compartment - (1) adjustable divider shelf in each L R and RR compartment - Double-panel galvanneal doors on rear of canopy (20 gauge outer, 14 gauge inner): - 49.5”W x 63.1” H clear door opening dimensions - Solid panel; no glass/ glass guards - 71.1” interior clear height - (2) L E D interior dome lights - (2) full length shelves on each side of canopy Interior - 6-year limited warranty - Electro- immersion epoxy primer process - Fully undercoated (Acrylic) - LED stop, tail, turn, and back-up lights - Chassis-specific install kit (loose): - Includes chassis-specific wiring harness adapter - 94”W Galva-grip bumper (loose) with hitch recess and K nap Liner coating - Canopy upper side doors with 3-point twist latches - Rear chute doors deleted - 94” wide knaplined Galva-grip step bumper Install Knapheide dual rear wheel KUV cc canopy body as follows: - S/T /T lights - Mud flaps - (1) fuel spout - (2) interior dome lights - Standard bumper Paint 132” K U V cc canopy body urethane: Ford paint code PQ 1 Exhaust extension to bring exhaust out flush with the body 1 Class V receiver hitch installed as follows: - 24,000 lb. maximum trailer weight , 1,600 lb. maximum vertical load - 2” receiver tube with pin and clip - Includes pin with cotter - Powder coated black 1 7-way trailer socket , RV style with flat blades 1LED compartment light strips in all compartments for an 8 compartment service body - High intensity LED light strips mounted on each side of the compartment - Wired to existing chassis upfitter switch 1 C T E H .D . Aluminum 7-drawer unit installed as follows: LV2 - 14” w x 32”h x 16”d - (4) -3”, (2) -5”, and (1) -7” removable drawers – Aluminum construction - Patented motion latch drawer handles - 250 lb. capacity roller slides - Powder coated red with black handles - (6) divider kits - Rubber liners in all drawers 1 Install customer’s existing Miller Bobcat 250 welder in LV1/ transverse compartment - Plumb exhaust up through canopy top 1 110v GFI electric outlet on rear of body wired to customer supplied welder (No inverter) Install (4) Whelen WHL31HAF LED beacon lights as follows: - Weld mounting plates to canopy - (2) at the front corners of canopy body - (2) at rear corners of the canopy - Install LED beacon light on mounting plates and wire to chassis upfitter switch 1 Install Ford Factory Backup Camera 1 Dominator Liner red, front of body 1 Speed Liner 1000 black, cargo area floor and tailgate Speed Liner 1000 black, cargo area sides Provide the cost to furnish and deliver (inclusive of shipping) F.O.B., the following items meeting the specifications: #05031/8826 Pub: May 12, 16, 19, 23, 26, 2023